Good morning Group,
working on a Schindler QKS door operator on a new schindler 330 hydro.
Doors are dead fault is 202 code 6. lon test is good, fuses are good with 230 AC going from control to operator, signal to open and close is leaving controller according to LCD display. Green lights on operator are as follows:
INIT = flashing on and off
SENSOR = on steady
OBSTACLE = on steady
CLOSE = on when doors full closed, off when not full close
OPEN = on when full open
APPL = off

Happy not to be working on this one personally, trying to help a friend.