Damn! I've had people reach between the strikes and flip the pit stop switches but I've never heard of someone reaching up and hitting the gate switch. I'll bet the the software would fire a mismatch. Sometimes i've seen gate switches hang on the cover (while cleaning them and putting the cover back on when the car door is open) or the pivot pin gets bent or dirty. The roller is supposed to hit that cam while opening and knock it down to ensure drop out (as I'm sure you know). It probably has one of those clutches that can't split the doors but if not, is it possible someone is separating the doors and the SDoor contact is making up while the OL is triggered? You never know what you'll find in these hotels.....
Last edited by E-man; 02/12/14 05:22 PM.