|
|
|
0 members (),
26
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,939
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Mar 2012
Posts: 104
member
|
|
member
Joined: Mar 2012
Posts: 104 |
E171: usual synchronous position error. To prevent such problem as door zone not detected because of non-corresponding synchronous position by rotary encoder
E32: INV U-phase IGBT Error( 180-420m/min). When U-phase +IGBT and -IGBT are turned on simultaneously, or when IGBT driving
power has failed or INV output(U, V, W) is short
E53: INV Charge Error
|
|
|
|
|
Joined: Oct 2016
Posts: 10
stranger
|
|
stranger
Joined: Oct 2016
Posts: 10 |
Dear Kenelev; thank you I really appreciate your help, infact am looking for some to come to ethiopia( east africa), and help me to fix the elevator. Do you think you can help me?, my email: [email protected] or [email protected] my number:+251911-175303 best regards Fikadu
|
|
|
|
|
Joined: Oct 2016
Posts: 10
stranger
|
|
stranger
Joined: Oct 2016
Posts: 10 |
Please I need manual for sigma elevator
|
|
|
|
|
Joined: Mar 2012
Posts: 104
member
|
|
member
Joined: Mar 2012
Posts: 104 |
Sorry fikir123, ethiopia is a bit too far form me.
And I don't have the complete manual either only the fault chart.
But by looking @ the faults. Look like u have the dive problem.
IGBT may be shorting out. Send out the drive to have it check out.
|
|
|
|
|
Joined: Oct 2016
Posts: 10
stranger
|
|
stranger
Joined: Oct 2016
Posts: 10 |
Thanks for your help Kenelev,i really appreciate, but do you know anyone who can come and fix it for us( a good elevator technician) and if you dont mind, can you send me the fault chart?, thank you once again.
best regards
Fikadu
|
|
|
|
|
Joined: Mar 2012
Posts: 104
member
|
|
member
Joined: Mar 2012
Posts: 104 |
|
|
|
|
|
Joined: Oct 2016
Posts: 10
stranger
|
|
stranger
Joined: Oct 2016
Posts: 10 |
Dear Kenelev;
thanks...there is nothing in my PM
regards
Fikadu
|
|
|
|
|
Joined: Mar 2012
Posts: 104
member
|
|
member
Joined: Mar 2012
Posts: 104 |
|
|
|
|
|
Joined: Oct 2016
Posts: 10
stranger
|
|
stranger
Joined: Oct 2016
Posts: 10 |
Dear Kenelev;
there is nothing in my email as well
fikadu
|
|
|
|
|
Joined: Mar 2012
Posts: 104
member
|
|
member
Joined: Mar 2012
Posts: 104 |
re-send again. Check your spam also.
|
|
|
|
|
Joined: Oct 2016
Posts: 10
stranger
|
|
stranger
Joined: Oct 2016
Posts: 10 |
|
|
|
|
|
Joined: Jan 2017
Posts: 1
stranger
|
|
stranger
Joined: Jan 2017
Posts: 1 |
Hi, this is great forum and very helpful , kenelev could you please send me the sigma manual, [email protected]
|
|
|
|
|
Joined: Sep 2013
Posts: 1
stranger
|
|
stranger
Joined: Sep 2013
Posts: 1 |
Hi. Can you help me for ereor 069
|
|
|
|
|
Joined: Mar 2012
Posts: 104
member
|
|
member
Joined: Mar 2012
Posts: 104 |
Hi Rosman:
I cannot find fault code 069. According to my fault 069 is not being use.
Is any other fault code show up?
|
|
|
|
|
Joined: Mar 2012
Posts: 104
member
|
|
member
Joined: Mar 2012
Posts: 104 |
Hi Dipi:
I do not have the manual, only fault chart.
What fault it showing? and what seem to be the problem?
|
|
|
|
|
Joined: Apr 2017
Posts: 6
stranger
|
|
stranger
Joined: Apr 2017
Posts: 6 |
Hi
I have a problem with the IGBT, i have been replaced with new igbt but the same problem also occurs namely U phase problem first error is E035 after reset the controller error is E032-91 anyone can help me
Thanks
|
|
|
|
|
Joined: Mar 2012
Posts: 104
member
|
|
member
Joined: Mar 2012
Posts: 104 |
u may have problem with the DPP board.
pm your email.
|
|
|
|
|
Joined: Apr 2017
Posts: 6
stranger
|
|
stranger
Joined: Apr 2017
Posts: 6 |
Dear kenelev My email: [email protected]
|
|
|
|
|
Joined: Mar 2012
Posts: 104
member
|
|
member
Joined: Mar 2012
Posts: 104 |
|
|
|
|
|
Joined: Apr 2017
Posts: 6
stranger
|
|
stranger
Joined: Apr 2017
Posts: 6 |
Thanks for your help Kenelev
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
