Kcm v3f25 intermittent 126 sub 2100 faults.

0 members (), 34 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums13

Topics7,385

Posts40,939

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

Kcm v3f25 intermittent 126 sub 2100 faults. #24477 08/04/18 06:14 PM
Joined: Aug 2014 Posts: 4 R Rdwarrior stranger
Rdwarrior stranger R Joined: Aug 2014 Posts: 4	Car takes calls and leveling, load weighing, and terminal slowdowns look good. Happens about every 8 or 10 runs. Running at speed and no specific location in hoistway. Not terminals. Verified adon 3 hoistway and car safety chain inputs with meter set for minimum record. Ideas? Last edited by Rdwarrior; 08/04/18 06:17 PM.

Re: Kcm v3f25 intermittent 126 sub 2100 faults. Rdwarrior #24502 08/10/18 04:24 PM
Joined: Aug 2014 Posts: 4 R Rdwarrior stranger
Rdwarrior stranger R Joined: Aug 2014 Posts: 4	adjusted 5-20-9 to 150 and good to go.

Re: Kcm v3f25 intermittent 126 sub 2100 faults. Rdwarrior #24554 08/21/18 10:39 PM
Joined: Feb 2016 Posts: 22 U Upndwn Elevator Guy
Upndwn Elevator Guy U Joined: Feb 2016 Posts: 22	Did you change to an adon 3 board? Then changed 5-20-9 to 150 And problem went away?

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Home Forums General Discussion Technical Questions Kcm v3f25 intermittent 126 sub 2100 faults.