400A drive setup

0 members (), 23 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums13

Topics7,385

Posts40,939

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

400A drive setup #30081 10/23/20 05:34 PM
Joined: Sep 2019 Posts: 38 R Rev1 newbie
Rev1 newbie R Joined: Sep 2019 Posts: 38	I installed a new VF BR33 drive. My question is because the old drive software was 1.08, the new software is 2.28 and the controller GC software is 2.13, will I need to have shindler commission this drive. I have little to know info for this unit but did see drv end commission in the settings? If anyone can throw me a bone it would be greatly appreciated. FYI: drive just has parameter amber light lit and controller says commission. Thanks.

Re: 400A drive setup Rev1 #30133 11/07/20 06:40 PM
Joined: Jan 2018 Posts: 8 O ovideo04 stranger
ovideo04 stranger O Joined: Jan 2018 Posts: 8	I'm in the same situation. Looks like the GC software , your core software need to be updated too. Let me know what you got.

Re: 400A drive setup Rev1 #30135 11/09/20 04:43 AM
Joined: Apr 2014 Posts: 280 H heisenberg Engineer
heisenberg Engineer H Joined: Apr 2014 Posts: 280	You may need to change the type of drive that has been selected in the settings. Drive end commissioning is only for when you've changed parameters and want to save it

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Home Forums General Discussion Technical Questions 400A drive setup