Schindler not moving after Deep Switch 8

0 members (), 20 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums13

Topics7,385

Posts40,942

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

Schindler not moving after Deep Switch 8 #33538 07/30/22 08:45 PM
Joined: Jun 2014 Posts: 38 W wiz newbie
wiz newbie W Joined: Jun 2014 Posts: 38	Greetings We did a learning measurement trip on a schindler smart mrl 002 elevator using Dip Switch 8 on the main controller board. The lift learnt the floors, after the learnt trip it goes to the last floor and shows the WDOG, Drive, KS, and Error LED blinking and remains on the last floor. Anyone experience this problem, what causes it? Can it be corrected? Regards

Re: Schindler not moving after Deep Switch 8 wiz #33545 07/31/22 06:54 PM
Joined: Jun 2014 Posts: 38 W wiz newbie
wiz newbie W Joined: Jun 2014 Posts: 38	Originally Posted by wiz Greetings We did a learning measurement trip on a schindler smart mrl 002 elevator using Dip Switch 8 on the main controller board. The lift learnt the floors, after the learnt trip it goes to the last floor and shows the WDOG, Drive, KS, and Error LED blinking and remains on the last floor. Anyone experience this problem, what causes it? Can it be corrected? No safety circuit open, but something is blocking the lift from moving, any ideas? Regards

Re: Schindler not moving after Deep Switch 8 wiz #33546 07/31/22 07:49 PM
Joined: May 2012 Posts: 89 S sampler journeyman
sampler journeyman S Joined: May 2012 Posts: 89	sim Last edited by sampler; 07/31/22 08:07 PM.

Re: Schindler not moving after Deep Switch 8 sampler #33548 07/31/22 10:53 PM
Joined: Jun 2014 Posts: 38 W wiz newbie
wiz newbie W Joined: Jun 2014 Posts: 38	Are you saying the SIM card might be faulty or not in place properly but lift did a shaft measurement?

Re: Schindler not moving after Deep Switch 8 wiz #33556 08/01/22 02:50 PM
Joined: May 2012 Posts: 89 S sampler journeyman
sampler journeyman S Joined: May 2012 Posts: 89	yes. it goes for learning trip although without sim and after trip if it can not read sim it behaves as you menioned.

Re: Schindler not moving after Deep Switch 8 sampler #33586 08/04/22 06:57 PM
Joined: Jun 2014 Posts: 38 W wiz newbie
wiz newbie W Joined: Jun 2014 Posts: 38	Originally Posted by sampler yes. it goes for learning trip although without sim and after trip if it can not read sim it behaves as you menioned. Greetings I tried re-inserting the sim. Is there a way to solve this problem besides replacing the SCIC? Regards

Re: Schindler not moving after Deep Switch 8 wiz #33597 08/05/22 08:13 AM
Joined: May 2012 Posts: 89 S sampler journeyman
sampler journeyman S Joined: May 2012 Posts: 89	maybe replacing SCIC may not be a solution. generally sim is broken. so if you have a bionic controller (bx, 3300 etc..) and also cadi you can check Sim. if not possible the company support should be requested. I Last edited by sampler; 08/05/22 08:14 AM.

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Home Forums General Discussion Technical Questions Schindler not moving after Deep Switch 8