|
|
|
0 members (),
16
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,945
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Dec 2009
Posts: 644
addict
|
|
addict
Joined: Dec 2009
Posts: 644 |
Is there a specific 188e board just for LON? We have one that crashed and Access is unable to get it to boot back up. We have several 188e boards, but never had to replace one with LON. We have the job files on the CD and have the talk adapter. About to get a crash course in it.
|
|
|
|
|
Joined: Jun 2016
Posts: 5
stranger
|
|
stranger
Joined: Jun 2016
Posts: 5 |
Pretty sure all 188Es are equipped for Lon, however some are discretely wired (tac-22) they still use the same board.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,767 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,767 Likes: 11 |
Not exactly, KY9 boards have no LON controllers, only work for simplex Tac22. KY8 has 2 LON controllers, cat and hall, so work for simplex TAc20. All duplex require a KY7 because they have all 3 LON controllers populated. The third is for the group. Those are the old part numbers though, all of the newer boards KY10 and KY14 have all 3 so can replace any 188e.
|
|
1 member likes this:
Elev^te1979 |
|
|
|
|
Joined: Dec 2009
Posts: 644
addict
|
|
addict
Joined: Dec 2009
Posts: 644 |
The wiring diagram is easy to read on the communication. Thanks for the information and the wiring diagram.
When hooking up the lon talk adapter:
What con do we hook up the external power source to the lon card?
Last edited by solidstate; 07/11/25 02:25 PM.
|
|
|
|
|
Joined: Jun 2016
Posts: 5
stranger
|
|
stranger
Joined: Jun 2016
Posts: 5 |
Credit where it is due dirt, I have added this info to my notes on tac 20s, thankyou!
|
|
|
|
|
Joined: Dec 2009
Posts: 644
addict
|
|
addict
Joined: Dec 2009
Posts: 644 |
Update----big thanks as always to Dirt for the diagram on the lon talk cable. We were successful on this one. On the 188e board we did have to load up a different version of the software, as it was an older board. Thanks to another helpful person, that was resolved also.
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
