|
|
|
0 members (),
23
guests, and
4
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,945
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: May 2013
Posts: 44
Mechanic
|
|
Mechanic
Joined: May 2013
Posts: 44 |
Can anyone tell me if there is any special procedure for replacing the boards?
Should the Power card go in first, alone, and then the 5 Volt power supply adjustment be made and then (line out) the remaining boards be inserted?
Also how do you get to the voltage adjustment pot on the power board when it is inserted? - I didn't see a removeable cover for access.
|
|
|
|
|
Joined: Jan 2012
Posts: 909
4 Ever Learning.
|
|
4 Ever Learning.
Joined: Jan 2012
Posts: 909 |
The power should be off when ever you want to remover any of the boards. You will risk damaging them if you remove them with the power on. Sorry I don't know any short cuts on adjusting the power supply.
Make good choices,
JKH
|
|
|
|
|
Joined: May 2013
Posts: 44
Mechanic
|
|
Mechanic
Joined: May 2013
Posts: 44 |
JKH
thanks for the quick reply.
Kinda crazy to a have a volt adjustment pot that canot be access with power to the board !
|
|
|
|
|
Joined: May 2011
Posts: 487
addict
|
|
addict
Joined: May 2011
Posts: 487 |
Use an offset plastic pot tweaker. I use an orange stick because IIRC, the pot wheel is knurled on the side.
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
