Uppo.. not true about one direction working on a reset of pawl on an advancer 6850BJ meaning the pawl core is ok. On the advancer selector the same brush is used for Up and Down Car Button Stops. CAC picks CBS(car button Stop BOTH DIRECTIONS. If your getting reset voltage to the PM coil and it is not an open coil the core is dirty.
Yes isn't that the point tho Rolly? If your using the same brush to stop, and your volts are good then the core most likely be sticking in both direction, not just 1. This has been my experience. When I said good I was meaning if it 'was' working in the other direction. Anyway all good. As to this situation im sure the poster stated this has no advancer panel anyway.
