Car is original and is balanced at 43%. Car station was replaced, but the new one weighs less than the two originals combined. We had to do a five yr test anyway, when we brought the weights in, we checked the balance. When we put the full load in the car and forced a relevel, it was 3 turns undercompounded, three turns brought it able to recover and going back to balance, we reset the approaches. All appears to be good. Thanks to the member that sent the adjusters notes. They did not match the job, but helped immensely. I don't know how others do a buffer test on older WL equipment, but back when I adjusted Dovers, We would park the car at a center floor on Independent service, reverse the motor fields, and set a call for a terminal. The car would accel to high speed in the wrong direction and BUFFER TEST. Works just as well on OTIS. Anyway, All is Well. Thanks to all.
