A miprom 1 hydro was upgraded to a newer miprom 1 SRB type Cpu. An additional rack was added and a couple i/o cards for fire service upgrade.The unit will communicate to the Miprom 21 tool.
We had some corruption to the serial Eeprom. To be able to write to the eeprom via the tool I need to reinitialize the eeprom first. The tool prompts me for a 5 digit number when trying to initialize the new eeprom. Does anyone know what number the controller is looking for. Once this is done I can program the number of floors and status words used by the system.
