Just took on the contract at Eglin AFB and in to it 3 weeks now and I have lost 3 drives lol Miprom 21 in the control tower 12 stop 1 elevator had a storm blow thru and when I come in Monday she was down on a CP 06 missing phase drive fault
All phases seem to be nominal controller is setup for 240vac I have 128vac on all 3 legs checked fuses in the disconnect, fuses in the top of the drive, fuses on the drive control board switcher and power board all good, and the relay board up by the cpu all fuses check good but I cant get the CP 06 to go away
perimeter 116 is good K-AC line volts at 240 any suggestions?
