Jkh- I have non job specific prints I can see the CpU swith is in line with the fuse
I hooked it up exactly with the old wires for the old electric eye.
Elmcannic- the eye worked i trimes back the wire and ran it direct to the gate keeper box varified with adams tech the voltages the new gkmax takes all voltage. Aso the gate keeper is corect with the lights for power , light curtain, buzzer sounds when you brake the beam. After install we tried to put power on amd realized we had no pi in cop or hall and no power to D.O. Motor .
Also no relays or board lights in controller checked fusses and F1 blows only when i turn on cpu. Power with doors on, auto , and io dont blow fuse switch on cpu and pop!
