thanks omms, that makes sense. so 100mm/s would be 19.69 fpm and 400mm/s would be 78.76fpm . still wondering why it faulted out at 400mm/s. trying to figure out how do you get it to access at 400 without faulting, just for curiosity sake.
I'm wondering, since the cartop inspection speed was set to 100, and the absolute inspection overspeed was set at 120%, then the access speed still cannot exceed 120% of the cartop speed parameter. so wondering if i set cartop to 400, then i would expect to be able to run access at 400 also. not that I would, but just thinking out loud. also i believe my above math is correct, but if not you guys will let me know