So I replace the 1036 com board and I get nothing. So i replace the CAN chip on the CT board and it works, but I have no PI and no Hall lanterns. So I go to pull the CAN chip out of the 1043BN which is my hall lanterns, and low and behold that chip falls apart in my hand in about 6 pieces! Root problem found. Replaced that chip and now I have Hall Lanterns. So now I have to order a new PI driver board and all is well. The entire CAN BUS system was fried by faulty chip. Burn marks on CANH input on the PI Driver board. The one good thing I can say about a Galaxy controller is that they have a plethora of spare IC chips.
Thanks for the suggestions.
