|
|
|
0 members (),
29
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,944
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Feb 2015
Posts: 26
improving the trade
|
|
improving the trade
Joined: Feb 2015
Posts: 26 |
I seem to be having an intermittent problem with the GS_P input. I am not able to find it in the prints. it seems to be tied to door, gate locks, and DCL contracts. thanks
|
|
|
|
|
Joined: Jan 2012
Posts: 909
4 Ever Learning.
|
|
4 Ever Learning.
Joined: Jan 2012
Posts: 909 |
Is this the same car you ask about BP? If it is, sure sounds like a bad MLB...
Do you have a tool? Do you have a 2962 error code?
Make good choices,
JKH
|
|
|
|
|
Joined: Mar 2015
Posts: 69
Shaking the Bush!!
|
|
Shaking the Bush!!
Joined: Mar 2015
Posts: 69 |
That's the gate switch PAL input. It's one of the inputs that does the C-I/O check before each run.
It's a buddy(Pal) input. It should show two inputs on the print. They go to different areas.
Last edited by Magic smoke; 04/05/16 04:17 AM.
When every circuit board is made. They put a little magic smoke inside.
|
|
|
|
|
Joined: Feb 2015
Posts: 26
improving the trade
|
|
improving the trade
Joined: Feb 2015
Posts: 26 |
car is running, I believe the problem was DCL contacts not opening. the fault was 2812. I just got my hands on a tool for the next problem.
thanks
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
