|
|
|
1 members (ot1989),
33
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,944
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Dec 2011
Posts: 317
Mechanic
|
|
Mechanic
Joined: Dec 2011
Posts: 317 |
Having issues where doors stop working in both the close and the open positions. Tried swapping door board 3 times and problem doesn't go away. Won't even learn the door run. Does the clc prevent this from happening or the door op board?
|
|
|
|
|
Joined: Dec 2009
Posts: 644
addict
|
|
addict
Joined: Dec 2009
Posts: 644 |
the door board is only going to do what the clc tells it to do. Will it work with the MDO and MCO?
|
|
|
|
|
Joined: Dec 2011
Posts: 317
Mechanic
|
|
Mechanic
Joined: Dec 2011
Posts: 317 |
|
|
|
|
|
Joined: Apr 2016
Posts: 22
stranger
|
|
stranger
Joined: Apr 2016
Posts: 22 |
On the door board you have 3 buttons mdo is the manual door open and manual door close mdc and then a reset button
Last edited by Getemup; 04/14/16 04:29 PM.
|
|
|
|
|
Joined: Dec 2011
Posts: 317
Mechanic
|
|
Mechanic
Joined: Dec 2011
Posts: 317 |
Can do a door scan but it won't allow me to save pulse count parameter. Any reason for that? Sup doesn't clear on step 7 which means pulse count wasn't saved. What prevents pulse count from being saved in clc
Last edited by beaupeep; 04/14/16 04:40 PM.
|
|
|
|
|
Joined: Mar 2016
Posts: 270 Likes: 2
Elevator guy
|
|
Elevator guy
Joined: Mar 2016
Posts: 270 Likes: 2 |
Go back and check all adjustments especially 62-69
|
|
|
|
|
Joined: Apr 2016
Posts: 22
stranger
|
|
stranger
Joined: Apr 2016
Posts: 22 |
Might want to check the encoder and also could possibly be the clc. Also make sure that you getting the dol and the dcl leds to light on the door board
|
|
|
|
|
Joined: Dec 2011
Posts: 317
Mechanic
|
|
Mechanic
Joined: Dec 2011
Posts: 317 |
Does 65000 pulses sound normal?
|
|
|
|
|
Joined: Jul 2013
Posts: 206
enthusiast
|
|
enthusiast
Joined: Jul 2013
Posts: 206 |
Sounds high to me, last one I did was 490.
|
|
|
|
|
Joined: Apr 2016
Posts: 22
stranger
|
|
stranger
Joined: Apr 2016
Posts: 22 |
Sounds high to me as well I think that the last one I set up was 675
|
|
|
|
|
Joined: Dec 2011
Posts: 317
Mechanic
|
|
Mechanic
Joined: Dec 2011
Posts: 317 |
Does the high tach prevent the save. Will try to replace the tach
|
|
|
|
|
Joined: Feb 2013
Posts: 800
old hand
|
|
old hand
Joined: Feb 2013
Posts: 800 |
I know this sounds simple, but a lot of the time new belts can fix a problem like this. If they slip even a little the encoder counts are off. Just something to keep in mind.
|
|
|
|
|
Joined: May 2012
Posts: 194
member
|
|
member
Joined: May 2012
Posts: 194 |
..might want to changeout the motor had a problem recently on two of my cars at random jobs..
|
|
|
|
|
Joined: Mar 2014
Posts: 215
enthusiast
|
|
enthusiast
Joined: Mar 2014
Posts: 215 |
I'm with John jay on this one. At least try and tighten the belts before going for an encoder.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
That should have the big black plastic, analog encoder. I have seen the little digital encoder on these when we pick up new jobs. I think they are 500 cpr, DMC won't save a travel that high. I have also got way high travel #s replacing the analog encoder switches with Sees parts, I know it doesn't make sense but it worked fine with TK parts. If anyone else has seen that or can explain it I would appreciate hearing about it.
|
|
|
|
|
Joined: Mar 2015
Posts: 80
journeyman
|
|
journeyman
Joined: Mar 2015
Posts: 80 |
Make sure your replacing it with a 6300py4 board. Install the capacitor in the controller on p150 and g150. Replace all the belts. If they are dry-rotted or too tight or loose it will throw the counts off. Make sure the door close and open limits make. Good luck
|
|
|
|
|
Joined: Dec 2012
Posts: 25
newbie
|
|
newbie
Joined: Dec 2012
Posts: 25 |
Well if your CLC is an old version the new door board won't communicate with it, then you have to upgrade all the boards.
|
|
|
|
|
Joined: Dec 2011
Posts: 317
Mechanic
|
|
Mechanic
Joined: Dec 2011
Posts: 317 |
Ok, i've replaced motor, encoder, belts, door board. It's practically a new door op and i'm still getting a 65000 pulse count. Anyone have any other ideas
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
Do you get a different count if you move a limit?
|
|
|
|
|
Joined: Dec 2011
Posts: 317
Mechanic
|
|
Mechanic
Joined: Dec 2011
Posts: 317 |
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
