NOTE: Before beginning, make sure that the LON drivers have been installed
NOTE: When the Advanced LON Manager opens the adapter, but does not communicate with any node.

1. CLOSE IMS if opened!

2. INSTALL LONWORKS

3. REBOOT

4. Open the Control Panel from the Start Menu.

5. Open LonWorks� Plug 'n Play (ONLY PLUG AND PLAY)from the Control Panel .
NOTE: If LonWorks Plug 'n Play is not an available option, the drivers for the LonTalk card will need to be installed.

6. From the LonWorks Plug 'n Play window, left-click the pull down arrow under NI Application .
NOTE: PCC10NVI is the program default setting, every time it is installed.

7. A list of options will appear under the NI Application box. Left-click NSIPCC

8. After NSIPCC appears in the NI Application box, left click APPLY in the LonWorks Plug 'n Play box.

9. Click the Diagnostics button (the Diagnostics window will open).

10. Click the Comm button, and then click the YES button.

11. Click the OK button, and then click the YES button.

12. Click Ok Button.

13. Open IMS, Open advanced lon manager

The adapter should now be operational.

Last edited by xxXBlazeXxx; 04/21/16 11:13 PM.