|
|
|
0 members (),
25
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,944
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Jun 2016
Posts: 3
stranger
|
|
stranger
Joined: Jun 2016
Posts: 3 |
I have two tac 20 in same machine room , both UIT
screens Not working , have like four little dots
in middle left corner. Can these boards be
Swapped or are they job specific. Can they
Be disabled thru IMS? Any suggestions ?
|
|
|
|
|
Joined: Aug 2015
Posts: 20
stranger
|
|
stranger
Joined: Aug 2015
Posts: 20 |
In my experience.. I called vertical express I was trying to replace the screed with the same problem on a TAC22 Non-Proprietary and they said the warranty was expired and we need to contact a local TK company, I also tried to swap it with another controller and it did not work. I have an IMS tool and it works on that controller and its 100% better than the UIT screens.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
The UIT is fingerprinted to the job on TAC20s. Most likely someone has either installed a UIT from another car or loaded software not for that job. If you have IMS though, I wouldn't even bother with that thing. And having it disabled just gives building engineers and maintenance people one less thing to screw with.
|
|
|
|
|
Joined: Jun 2016
Posts: 3
stranger
|
|
stranger
Joined: Jun 2016
Posts: 3 |
Thanks for your inputs, I don't have the IMS yet. It is nice to have just to show status. Next time I am there I will try to swap them .
|
|
|
|
|
Joined: Aug 2015
Posts: 20
stranger
|
|
stranger
Joined: Aug 2015
Posts: 20 |
If you need ims I can help you.
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
