|
|
|
0 members (),
24
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,939
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Sep 2011
Posts: 26
newbie
|
|
newbie
Joined: Sep 2011
Posts: 26 |
1st series TAC50. Can't get my WDPF output to go high to run unit. Checked capacitors (all at or close 2000 microfarads), Swapped current regulator, QSS/QSR interface, inverter interface and motor IGBT and ribbon cable between inveter and current regulator. Checked all connections. It came up for a few seconds all on it own and did a recovery run but after changing inverter brd it will not come back up. Any ideas or suggestions?
|
|
|
|
Entire Thread
|
TKE TAC 50 drive faults 631,633,635,638,642,627...
|
green sleeves
|
09/08/16 03:55 PM
|
|
Re: TKE TAC 50 drive faults 631,633,635,638,642,627...
|
elmcannic
|
09/09/16 02:24 AM
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
