Any Dover Composite gurus out there?
I have a car that is slowing and approaching fine, but doesn't stop level. It's overshooting about 1/2 to 5/8 inch in both directions. Every once in a while it stops level. I've checked compounding. Up and down speed are within 3fpm. I've replaced optics 2LR, and LD. Sensors seem to be working good. Car just doesn't stop until plate breaks the opposing leveling sensor. I.e. - on a down run, they car levels down slightly past floor level ubtil its close to or at the LU optic sensor. If i tighten the zone, car still overshoots, then relevels. Any ideas?
