|
|
|
0 members (),
25
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,944
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Jan 2012
Posts: 120
member
|
|
member
Joined: Jan 2012
Posts: 120 |
Had water damage on a door board. Got new board from thysen. Hd-04 operator has 3 ph door motor that running the wrong direction now. I tried reversing 2 leads in all combinations. Door just shakes back, and forth, and faults out. Is there a phase monitor on this operator? How do you change motor rotation on this. There is a encoder attached to the motor. Any help is appreciated.
|
|
|
|
|
Joined: Mar 2014
Posts: 215
enthusiast
|
|
enthusiast
Joined: Mar 2014
Posts: 215 |
Software.....Do you have IMS? There is an apadter needed to hyperlink directly to the door board as another, more preferred, option. If you don't have either of these, get one of your Thyssenkrupp friends to give you a hand. Takes around 5 minutes if all goes well to drop the software on and rescan.
|
|
|
|
|
Joined: Jan 2012
Posts: 120
member
|
|
member
Joined: Jan 2012
Posts: 120 |
I do have Ims is it just door parameters I need to change?
|
|
|
|
|
Joined: Jan 2012
Posts: 120
member
|
|
member
Joined: Jan 2012
Posts: 120 |
I need a adapter. Do u have a part #? Or what to ask for?
|
|
|
|
|
Joined: Jan 2014
Posts: 736
old hand
|
|
old hand
Joined: Jan 2014
Posts: 736 |
408-324-6901
Moe, computer shop in San
Francisco for $175.
|
|
|
|
|
Joined: Jan 2012
Posts: 120
member
|
|
member
Joined: Jan 2012
Posts: 120 |
Thanks so much for the help. Equipment keeps changing we keep learning
|
|
|
|
|
Joined: Aug 2016
Posts: 778
old hand
|
|
old hand
Joined: Aug 2016
Posts: 778 |
Is this the same adapter for Tac 20?
|
|
|
|
|
Joined: Jan 2012
Posts: 120
member
|
|
member
Joined: Jan 2012
Posts: 120 |
It is not the same, just confirmed with a Thyssen Tec.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
You can change LHO with IMS but if you swap two motor leads you need to swap the encoder. That should work too. This is the same board used on all but the oldest TAC20s.
|
|
|
|
|
Joined: Dec 2012
Posts: 3
stranger
|
|
stranger
Joined: Dec 2012
Posts: 3 |
Hello dear friend,
we need technical manual of thyssenkrupp CMC4 lift control.
also the car board UCC-CMC4 and VF08 thyssen door operator.
bets regards
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
