Home Forums General Discussion Technical Questions experiences with the Dover T-IV world freedomware

Try logging in with HyperTerminal on windows XP, see if you can get in. Various passwords but most common is "DOVER TIII" without the quotes and all caps. Set HyperTerminal to com port number and baud=1200 Data 8 Parity None Stopbits 1 Flow control Hardware. If you can't get in then it is probably updated. Look at the chip labels on CPU board also. If DOVER may be ok, if Thyssen, it is probably IMS only. World tool does make dover easy if your not familiar with commands.