|
0 members (),
34
guests, and
0
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,939
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Jan 2016
Posts: 40
newbie
|
|
newbie
Joined: Jan 2016
Posts: 40 |
Hi All,
Could you help, please?
Gen2 with GECB controller having an error "TCI_Lock and TCI/ERO ON" during Run/Idle mode, with INS LED blinking and SVT Blink message.This happens very often and randomly especially during summer in the Middle East. I believed this TCI_Lock error has no relation with the landing door procedure/Otis software. I changed the RS14 an LT in the car but the error remains the same.
|
|
|
|
|
Joined: Jan 2014
Posts: 736
old hand
|
|
old hand
Joined: Jan 2014
Posts: 736 |
TCI is Top Of Car Inspection... Have you tried a fan to cool controls? All controller and drive fans working? Machine Room have Air Conditioning?
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
You can turn the TCI Lock feature off. It's under MCSS install parameters. Change from a 1 to a 0.
Last edited by Indirtwetrust; 07/23/17 05:00 PM.
|
|
|
|
|
Joined: Aug 2014
Posts: 106
member
|
|
member
Joined: Aug 2014
Posts: 106 |
The fact you are getting both TCI lock and TCI ON message randomly could be a trailer fault, find some spares and change out the return wires from the top.of car inspection switch to eliminate .
|
|
|
|
|
Joined: Jan 2016
Posts: 40
newbie
|
|
newbie
Joined: Jan 2016
Posts: 40 |
Dear Rolly,
GEn2 MRL with overhead without Air Conditioning, I have not noticed about the fan, I thought the fan was working well.
|
|
|
|
|
Joined: Jan 2016
Posts: 40
newbie
|
|
newbie
Joined: Jan 2016
Posts: 40 |
Dear Indirtwetrust,
I couldn't find the feature that you mention, Install parameters: [[b]b]1. System, 2. OCSS, 3. Group, 4. Drive, 5. Doors, 6. Position Reference, 7. Service, 8. Emergency, 9.Security, 10 Test.[/b]
Where can I find the feature under MCSS/Drive?
Thanks
|
|
|
|
|
Joined: Jan 2016
Posts: 40
newbie
|
|
newbie
Joined: Jan 2016
Posts: 40 |
Dear Pieman,
I suspected there is RSL communication issue regarding this issue, and I have changed the RSL 30VDC, Ground, D1, and D2 from controller to car top, but remain the same, I will try to change the return wires and update to you.
|
|
|
|
|
Joined: Jan 2016
Posts: 40
newbie
|
|
newbie
Joined: Jan 2016
Posts: 40 |
To avoid TCI lock, I put the lift in test mode, So the lift never idle for a long time, after 4 minutes there is one call from bottom to the top landing. During 3 weeks no TCI lock errors.
I knew this temporary solution due I lack for other solution.
|
|
|
|
|
Joined: Jan 2016
Posts: 40
newbie
|
|
newbie
Joined: Jan 2016
Posts: 40 |
2 days back lift stopped again and traps 3 ppl, I suggested them fixing AC to reduce the high temperature on the head hoistway.
|
|
|
|
|
Joined: Feb 2023
Posts: 5
stranger
|
|
stranger
Joined: Feb 2023
Posts: 5 |
I have the same problem, does anyone have any advice to give me ?
I've already replaced:
Rs14
Line terminator
No high temperature in the engine room
|
|
|
|
|
Joined: Apr 2023
Posts: 11
stranger
|
|
stranger
Joined: Apr 2023
Posts: 11 |
First of all, is a new or old Gen2?
Older use RSL on CAR com and inside COB board have other Line terminator integrated.
GL
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
