Kone lift with kdl 32 drive

1 members (JB01), 21 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums13

Topics7,385

Posts40,944

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

Kone lift with kdl 32 drive #22005 10/25/17 08:23 PM
Joined: Sep 2014 Posts: 3 W wael jouni stranger
wael jouni stranger W Joined: Sep 2014 Posts: 3	Kindly i have kone elevator with kdl32 drive giving fault 0007 ,(pin 30 stuck) lift stop at level and keep doors open , after rest it work and this fault comes 2 to 3 times per a day and some times work wor a month no fault , i change the pin 30 many times , i changed top of car board +ADO+ LCECPU to test and still have same problem , any one pass in this before ?

Re: Kone lift with kdl 32 drive wael jouni #22155 11/09/17 03:45 AM
Joined: May 2015 Posts: 8 L Lifty stranger
Lifty stranger L Joined: May 2015 Posts: 8	I have had this one before - Check the distance between 61U and 61N inductors and magnet on the floor that you are having the issue. Alternatively, replace 61U and 61N inductors[pins] one of them is faulty!

Re: Kone lift with kdl 32 drive wael jouni #22170 11/12/17 06:34 PM
Joined: Nov 2017 Posts: 39 A Azhar hussain newbie
Azhar hussain newbie A Joined: Nov 2017 Posts: 39	i am facing issue in kone elevator that lift start and goes downward in rated speed after 5 sec. and lift stop at next floor on maintenance speed error code occur 0152. kindly help me.

Re: Kone lift with kdl 32 drive Azhar hussain #22200 11/17/17 01:24 AM
Joined: May 2015 Posts: 8 L Lifty stranger
Lifty stranger L Joined: May 2015 Posts: 8	Check 77U, 77N, 77S inductors.

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Home Forums General Discussion Technical Questions Kone lift with kdl 32 drive