Home Forums General Discussion Technical Questions Omega 1000 Replacement parts

You still may be able to get the power supply and if that’s your only problem, it might work out. If programming is needed, well, that’s another story.
DirectLogic or DL model DL305 I believe is the power supply the Omega uses. “Automationdirect” can be found searching DirectLOGIC 305 (or Automationdirect) and you’ll see what’s available.
There are a few other components that can be worriesome on the Omega that may or may not be yet available.
The “Level Sensor Board” is one of the boards that you can buy repaired, but I’m not sure “new”.
The optics Amtech used on the sensor stick may or may not be available. These are used for leveling and door zone signals as well as slowdown inputs I believe.
World Electronics has a fair supply of some of these obsolete parts, but not too many for the Omega. World also does board repair.
Yes, ECI West has done the ladder logic reprogramming on an DirectLogic Controller for me before. Mike is the one who did the job. Thanks LA Tech- you beat me to it.