Home Forums General Discussion Technical Questions KONE monospace V3f25 no input to brake module

0 members (), 36 guests, and 3 robots.

Key: Admin, Global Mod, Mod

September
S	M	T	W	T	F	S
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30

Newest Members

Josephs, Javy89, Ropeguy67245, kywewa, Ingvar
10,040 Registered Users

Forum Statistics

Forums13

Topics7,385

Posts40,939

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

KONE monospace V3f25 no input to brake module #22869 01/31/18 12:05 PM
Joined: Aug 2013 Posts: 17 Auckland. New Zealand B bowser stranger
bowser stranger B Joined: Aug 2013 Posts: 17 Auckland. New Zealand	Brake doesn't lift on KONE monospace. The input to the brake module which Im guessing tells the module to lift the brake does not change when driving on inspection or normal and we get error 0101. This input comes from the LCECPU board via a ribbon cable. It is labelled 24v, 0v and control. It doesnt change state when we yry to run the lift. Has anyone experienced this?

Re: KONE monospace V3f25 no input to brake module bowser #22889 01/31/18 10:07 PM
Joined: Apr 2017 Posts: 96 U UpandDown2321 journeyman
UpandDown2321 journeyman U Joined: Apr 2017 Posts: 96	Sounds like it could be contact failure for PWM enable. 201:3 and 201:4 have contacts for that.

Re: KONE monospace V3f25 no input to brake module bowser #22898 02/01/18 03:53 AM
Joined: Apr 2014 Posts: 280 H heisenberg Engineer
heisenberg Engineer H Joined: Apr 2014 Posts: 280	Could be faulty brake module, I've had to replace 2 of them.

Re: KONE monospace V3f25 no input to brake module bowser #22903 02/01/18 11:03 AM
Joined: Aug 2013 Posts: 17 Auckland. New Zealand B bowser stranger
bowser stranger B Joined: Aug 2013 Posts: 17 Auckland. New Zealand	We changed the brake module and its not that. The input to the brske module doesnt change.... the control is supposed to be grounded which enables the brake module to lift the brakes... but this input/output does not change.

Re: KONE monospace V3f25 no input to brake module bowser #22905 02/01/18 05:55 PM
Joined: Nov 2013 Posts: 93 K koneisland journeyman
koneisland journeyman K Joined: Nov 2013 Posts: 93	Faulty CPU or ribbon cable ?

Re: KONE monospace V3f25 no input to brake module bowser #22906 02/01/18 10:56 PM
Joined: Aug 2013 Posts: 17 Auckland. New Zealand B bowser stranger
bowser stranger B Joined: Aug 2013 Posts: 17 Auckland. New Zealand	Its what Im thinking... Have you had this before?

Re: KONE monospace V3f25 no input to brake module bowser #22913 02/02/18 03:02 PM
Joined: Aug 2013 Posts: 17 Auckland. New Zealand B bowser stranger
bowser stranger B Joined: Aug 2013 Posts: 17 Auckland. New Zealand	Was the main drive board. FYI

Re: KONE monospace V3f25 no input to brake module bowser #22962 02/06/18 05:41 AM
Joined: Apr 2014 Posts: 280 H heisenberg Engineer
heisenberg Engineer H Joined: Apr 2014 Posts: 280	Dam, hope it wasn't too pricey! Glad you found the problem

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

PECCO PH5000 Overspeed Governor
by stankap, September 24

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Responsive Width:

PHP: 8.3.33 Page Time: 0.024s Queries: 30 (0.007s) Memory: 3.0304 MB (Peak: 3.5926 MB) Data Comp: Off Server Time: 2026-09-20 22:50:08 UTC
Valid HTML 5 and Valid CSS