|
|
|
0 members (),
39
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,939
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Jun 2010
Posts: 15
stranger
|
|
stranger
Joined: Jun 2010
Posts: 15 |
Is there anyone out there that has put a new TKE HDLM door operator on an existing DMC? The new operators come with the PA6 Universal Door Board and a UIT. I know that it can be set up for 485 communication. However, I am unsure if they will talk or not. As always, Vertical Express and TKE are of no help at all.
|
|
|
|
|
Joined: Mar 2015
Posts: 80
journeyman
|
|
journeyman
Joined: Mar 2015
Posts: 80 |
Tke has their new door operators that will work i believe. Ld16 operators. Never removed a dmc door operator. Just replaced the board since it communicates with everything such as the clc and selector.
|
|
|
|
|
Joined: May 2015
Posts: 359
enthusiast
|
|
enthusiast
Joined: May 2015
Posts: 359 |
I believe for the DMC you need to use a PY2 or PY4 board. I don't believe the PA boards will work.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
That is not going to work.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
I was talking to someone about this yesterday. I suggested you order the FX2 board on eBay for $200
|
|
|
|
|
Joined: Jun 2010
Posts: 15
stranger
|
|
stranger
Joined: Jun 2010
Posts: 15 |
Thanks for your input everyone. My problem is that we installed one HD/LM operator already. I know that the mechanical parts to the operator are very similar, could I switch the PA door board out for a PY or the FX2 board you are suggesting? What I am not sure of is that the PA operator has a VFD drive in it and runs a three phase AC motor. Are the PY or FX boards capable of running an AC motor? Or do I need to replace the motor with a DC motor? Vertical Express suggested installing an HD85 operator instead. I suppose I am wondering if I should just re-install the old operator, return the HD/LM operator and purchase the HD85 instead. This is the price I pay for not verifying the proper job number on the survey.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
Are the PY boards available from Vertical express? I was under the impression this was because they were back ordered or something. You should be able to make this work with a PY4 board and a 1/6 HP DC motor and encoder. The part number for the motor with the correct encoder is 9841775. You also need the capacitor that goes under the door board.
|
|
|
|
|
Joined: Jun 2010
Posts: 15
stranger
|
|
stranger
Joined: Jun 2010
Posts: 15 |
I will check today. I think Sees sells them as well...normally a bit pricey. It doesn't hurt to give it a shot. Thanks for the input.
|
|
|
|
|
Joined: Oct 2012
Posts: 262
enthusiast
|
|
enthusiast
Joined: Oct 2012
Posts: 262 |
Send that operator back and just replace bad board
|
|
|
|
|
Joined: Nov 2021
Posts: 69
journeyman
|
|
journeyman
Joined: Nov 2021
Posts: 69 |
Did this ever work?? Haha
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
