|
|
|
0 members (),
23
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,939
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Jun 2018
Posts: 13
stranger
|
|
stranger
Joined: Jun 2018
Posts: 13 |
Hi guys, i need to upgrade varidor 10 car doors with Fermatoor vvvf car doors, SDIC is Q3. attaching the bords photo, on the link below https://ibb.co/fBS8bVAny help regarding wiring and collecting the signals for new car doors would be appreciated 
|
|
|
|
|
Joined: Apr 2014
Posts: 280
Engineer
|
|
Engineer
Joined: Apr 2014
Posts: 280 |
Maybe ask fermator if they have any info. Surely they've got something
|
|
|
|
|
Joined: Jun 2018
Posts: 13
stranger
|
|
stranger
Joined: Jun 2018
Posts: 13 |
Thanks Heisenberg,
i know everything about fermator, but i don't have documentation regarding SDIC.Q3 i mean where from to collect open and close door signals.
|
|
|
|
|
Joined: Apr 2014
Posts: 280
Engineer
|
|
Engineer
Joined: Apr 2014
Posts: 280 |
Do you have electrical schematics?
|
|
|
|
|
Joined: Aug 2014
Posts: 134
member
|
|
member
Joined: Aug 2014
Posts: 134 |
From the picture it looks like a Schindler Smart MRL?
In that case you dont have a DOD PCB where you can choose your type of door machine. So I think I would remove the 3 main power phases of the X400 plug on the SDIC PCB and use the relays ST-S and ST-O to generate my open and close signals to the Fermator door controller. Remember to connect the door open limit (KET-O XKET Pin 2-5) and door close limit (KET-S XKET Pin 3-4) signals to the plug XKET on the SDIC PCB. The Schindler controller is very sensitive about these signals. You can connect the door reopen signal from the door controller in the same plug (KSKB XKET Pin 1-6).
Last edited by Alex75; 10/31/18 08:51 AM.
|
|
|
|
|
Joined: Jun 2018
Posts: 13
stranger
|
|
stranger
Joined: Jun 2018
Posts: 13 |
Do you have electrical schematics? No, i dont have the schematics 
|
|
|
|
|
Joined: Jun 2018
Posts: 13
stranger
|
|
stranger
Joined: Jun 2018
Posts: 13 |
From the picture it looks like a Schindler Smart MRL?
In that case you dont have a DOD PCB where you can choose your type of door machine. So I think I would remove the 3 main power phases of the X400 plug on the SDIC PCB and use the relays ST-S and ST-O to generate my open and close signals to the Fermator door controller. Remember to connect the door open limit (KET-O XKET Pin 2-5) and door close limit (KET-S XKET Pin 3-4) signals to the plug XKET on the SDIC PCB. The Schindler controller is very sensitive about these signals. You can connect the door reopen signal from the door controller in the same plug (KSKB XKET Pin 1-6). Yes Alex, it is Smart Mrl, and there is no DOD PCB. Thanks for helping me.
|
|
|
|
|
Joined: Aug 2014
Posts: 134
member
|
|
member
Joined: Aug 2014
Posts: 134 |
From the picture it looks like a Schindler Smart MRL?
In that case you dont have a DOD PCB where you can choose your type of door machine. So I think I would remove the 3 main power phases of the X400 plug on the SDIC PCB and use the relays ST-S and ST-O to generate my open and close signals to the Fermator door controller. Remember to connect the door open limit (KET-O XKET Pin 2-5) and door close limit (KET-S XKET Pin 3-4) signals to the plug XKET on the SDIC PCB. The Schindler controller is very sensitive about these signals. You can connect the door reopen signal from the door controller in the same plug (KSKB XKET Pin 1-6). Yes Alex, it is Smart Mrl, and there is no DOD PCB. Thanks for helping me. No worries, feel free to post again, if you have any futher questions. /Alex
|
|
|
|
|
Joined: Jun 2018
Posts: 13
stranger
|
|
stranger
Joined: Jun 2018
Posts: 13 |
Well guys, Varidor 10 cabin door upgrade with Fermator VVVF5 accomplished successfully Big thanks to Alex75 who helped with great explanation. Attaching some photos. https://ibb.co/fDDMvAhttps://ibb.co/iV9daAhttps://ibb.co/nHOt8VCheers !!!!!
Last edited by Nikic; 11/12/18 08:03 AM.
|
|
|
|
|
Joined: Nov 2013
Posts: 93
journeyman
|
|
journeyman
Joined: Nov 2013
Posts: 93 |
What a mess. Maintenance man needs shooting.
|
|
|
|
|
Joined: Jun 2018
Posts: 13
stranger
|
|
stranger
Joined: Jun 2018
Posts: 13 |
What a mess. Maintenance man needs shooting. You are right, not exactly for shooting but enough for being punished. Any way that photo is taken during figuring out how to do it, it is sorted later
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
