CVT Millar not picking brake

0 members (), 34 guests, and 0 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums13

Topics7,385

Posts40,939

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

CVT Millar not picking brake #25535 01/04/19 12:39 PM
Joined: Jan 2018 Posts: 11 1 1970 stranger
1970 stranger 1 Joined: Jan 2018 Posts: 11	First time I have seen one of these contraptions..29 is up looks like I am needing 24vdc to pick brake release? prints are in tuff shape, any help would be appreciated!

Re: CVT Millar not picking brake 1970 #25576 01/08/19 10:49 PM
Joined: Jan 2018 Posts: 11 1 1970 stranger
1970 stranger 1 Joined: Jan 2018 Posts: 11	K7 is not energizing I have 24vdc on term 12 but not coming back to 11 which goes to relbk relay took the board off to get repaired?

Re: CVT Millar not picking brake 1970 #25600 01/10/19 12:02 AM
Joined: May 2012 Posts: 194 L Len member
Len member L Joined: May 2012 Posts: 194	......I found some of my old Millar CVT2400 stuff..looking at the prints that I have BKR is picked when PA contacts pick and when either a up/dn demand is given those contactors pick as well.fed from the (HMFM)..Hoist Motor Field Regulator..

Re: CVT Millar not picking brake 1970 #25615 01/11/19 12:20 AM
Joined: Jan 2018 Posts: 11 1 1970 stranger
1970 stranger 1 Joined: Jan 2018 Posts: 11	I have a RELBK Len is that on your prints?

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Home Forums General Discussion Technical Questions CVT Millar not picking brake