Whats your sync time?set it to max
Not sure - is that adjustable from the U I T?
All I’ve found that I can see from the UIT is the Force Jack Resynch command and the Adj. 044 (Jack Resync Interval) which is default set to 1500.
The Tac32 manual (this is a Tac20) shows a JRT adjustment, but that just sets when it auto resyncs, apparently. That is 9am, I believe. I haven’t seen any adjustments that address the duration of a resync function?
In observing a resynch from the carton, the car settles a few inches, pauses, then settles to the springs and the piston bolts bottom on both sides, sits for about...5 seconds, then slaps back up to the platens. On an FJR, it happens once, on a scheduled synch it does it twice.
