Home Forums General Discussion Technical Questions MCE Terminal Emulator Software on Laptop

Has anyone tried to put the terminal emulator software for IMC CRTs on a laptop? Motion sent me to Ericom website but couldn’t give me much more info. The only Emulator on there that matched one of the ones listed in the original Computer Peripherals manual was WY-370 so I downloaded the trial for that. So far so good. Now I need to convert a 9 pin Dsub to an RJ11 plug. Does anyone know the pin out for this? There is an RJ11 to 25 pin diagram in the back of the old peripherals manual so I think I’m going to try that with a regular 9 to 25 pin adapter only not actually use the adapter, just wire from the 9 pin to RJ11. Any input on this would be appreciated.

Depending on the vintage you probably want Tiger Term/WY-360. I can email you the program and easy to setup.

Sure, that would be great. What about the DB9 to RJ-11 pin out? And have you got it to work with a USB to serial adapter?

I'm interested in this.

Pm me your email. Yes I does work with USB adapter.

I did

I sent you fellas a Dropbox file

I got the DB9 female to RJ11 cable from MCE today. For anyone who’s interested, here’s the pin out.

RJ11 pin 2 to DB9 pin 3, RJ11 pin 3 to DB9 pin 2, RJ11 pin 5 to DB9 pin 5. Then pins 4, 6, & 8 are jumped together on the 9 pin end.

Would like to have a copy of tigerterm too if anyone can share.

Thank you Turbo6

I just sent a request

Thanks Turbo6

Has this worked for you guys? Meaning you have tested on controller

I haven’t got a chance to try yet

So I finally got a chance to try this today. It works perfectly! I found a document with the exact settings so I’d already set it up. So today I plugged it in, opened the program and immediately got the MCE start screen. I was sure I’d have to mess with something.

Thanks a lot to Turbo6. Tiger Term and the other one MCE recommended required buying a license.

If anyone wants the setup document PM me.

Good to hear👍

Thank you!

I sent a request a couple of times (mailbox.org address) but no one approved

Workingclass...
Resend

you can share the settings please.

Hey gents is this still a thing, I am looking for tiger term. I have the cable coming from MCE now. Trying to get help on this setup thanks

hello turbo i sent a request l
from lgian...@ver downloading to my drop box for stranger

I responded to Dropbox

Hi!
Thanks for the informational post. If you could send me the set up docs would be awesome! [email protected]

I really appreciate it!

for anyone who needs it, here is the terminal setup doc from MCE (baud rates, etc.)

https://acim.nidec.com/elevators/-/...ls/imc-troubleshooting-pocket-guide.ashx

Hi Indirtwetrust, can you please help me out with the laptop setup, I recently downloaded TTWIN 4 but i haven't tried it out. Plus it gives me a 30 day trial. with alot of searching the web i stumbled on your post. Hopefully this gets to you.

Hey!
Anyway you could share as well!

As soon as I get something I’ll let you know.

try this https://www.dropbox.com/scl/fo/qhbw...fyyeyrbds8h48vf&st=aphfuqyk&dl=0

unzip the file then right click on the file that say run as administratot and run as administrator. good luck.