Tac 50-04

0 members (), 23 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums13

Topics7,385

Posts40,939

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

Tac 50-04 #26185 03/12/19 08:36 PM
Joined: Oct 2018 Posts: 10 upndn33 Hackmaster
upndn33 Hackmaster Joined: Oct 2018 Posts: 10	I’m getting an ntsd error as well as a ntsd clamping error.this is a mod which has a tape with the perforated holes any help would be great.i changed the board and it ran for a few hours but crapped out again.i also did a learn run

Re: Tac 50-04 upndn33 #26190 03/13/19 12:48 AM
Joined: Dec 2015 Posts: 1,766 Likes: 11 Local 18 I Indirtwetrust ElevatorPractitioner
Indirtwetrust ElevatorPractitioner I Joined: Dec 2015 Posts: 1,766 Likes: 11 Local 18	Have you checked the magnets on the back of the tape?

Re: Tac 50-04 upndn33 #26193 03/13/19 08:25 AM
Joined: Oct 2018 Posts: 10 upndn33 Hackmaster
upndn33 Hackmaster Joined: Oct 2018 Posts: 10	Yes

Re: Tac 50-04 upndn33 #26196 03/13/19 04:13 PM
Joined: Dec 2010 Posts: 639 Likes: 4 Central Utah E elmcannic addict
elmcannic addict E Joined: Dec 2010 Posts: 639 Likes: 4 Central Utah	By “checking the magnets” as IDWT suggested, did you look carefully to be sure there are no gaps at all between magnets, and are they glued in place?

Re: Tac 50-04 upndn33 #26546 04/13/19 12:16 AM
Joined: Mar 2015 Posts: 80 W Whadafack journeyman
Whadafack journeyman W Joined: Mar 2015 Posts: 80	Do a tbs. adjust your decel before you do it. Bring it up while u do the scan then back down to its original settings

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Home Forums General Discussion Technical Questions Tac 50-04