|
|
|
0 members (),
25
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,944
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Jun 2016
Posts: 3
stranger
|
|
stranger
Joined: Jun 2016
Posts: 3 |
I have a KCM831 giving me a 83 fault. I've tried to learn the hoist way but the CPU will not continue once 30 comes high. Any suggestions?
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
Does the car run normally on inspection?
Is 61U coming on before 30?
Are all your 77 switches in the correct state?
Are you getting any other faults?
|
|
|
|
|
Joined: Jun 2016
Posts: 3
stranger
|
|
stranger
Joined: Jun 2016
Posts: 3 |
Car runs normal on inspection from controller and car top. 77 u/n, 77s stays high, switches are good. 61 u/n comes up like it is supposed to. No other faults now.
|
|
|
|
|
Joined: Jun 2016
Posts: 3
stranger
|
|
stranger
Joined: Jun 2016
Posts: 3 |
77u/n function as they should. 77s stays high constantly.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
|
|
|
|
|
Joined: Nov 2019
Posts: 13
stranger
|
|
stranger
Joined: Nov 2019
Posts: 13 |
Do the 61 u,n and 30 turn on off at the floors? Is your 77 u and n magnet distance correct from your terminal floors? When your parameter for speed is set for your drive i belive that the distance of your 77 switches need to be correct or shaft learn cant be done.
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
