Tac 32T

0 members (), 25 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums13

Topics7,385

Posts40,944

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

Tac 32T #28719 02/14/20 01:57 AM
Joined: Jan 2016 Posts: 1 M Mike G stranger
Mike G stranger M Joined: Jan 2016 Posts: 1	Just took on a few of these units, have a car stuck in “Init Shutdown” after a loss of power. Have not encountered this when the car has had the line out in the past. Nothing indicative of this in the fault log, reset faults, etc. Any idea?

Re: Tac 32T Mike G #28720 02/14/20 01:49 PM
Joined: Jan 2014 Posts: 736 R Rolly old hand
Rolly old hand R Joined: Jan 2014 Posts: 736	Do you have IMS? If so what version?

Re: Tac 32T Mike G #28721 02/14/20 02:15 PM
Joined: May 2015 Posts: 359 W wltr00 enthusiast
wltr00 enthusiast W Joined: May 2015 Posts: 359	Open your IO map and check your IO’s. There is a mismatch or an IO in the wrong state.

Re: Tac 32T Mike G #28722 02/14/20 04:27 PM
Joined: Dec 2019 Posts: 8 1 1Jr8c6 stranger
1Jr8c6 stranger 1 Joined: Dec 2019 Posts: 8	There are a few 2a pico fuses on the cpu I have had One of them blow after a building power issue gave me a similar issue. Worth a shot just make sure you pull them to check them.

Re: Tac 32T Mike G #28779 02/28/20 03:19 AM
Joined: Oct 2013 Posts: 45 R Rav4guy underdog
Rav4guy underdog R Joined: Oct 2013 Posts: 45	Hello friends. I have IMS software. IMS 32 bit ,16 bit I also have the latest version of IMS 2.7 now. Email me at [email protected] for details.

Re: Tac 32T Mike G #28782 02/28/20 03:40 AM
Joined: Oct 2013 Posts: 7 Cayman Islands R REJIVIJAY ELEVATOR Mechanic
REJIVIJAY ELEVATOR Mechanic R Joined: Oct 2013 Posts: 7 Cayman Islands	replace the CPUA software.

Re: Tac 32T Mike G #32015 11/03/21 12:21 AM
Joined: Feb 2018 Posts: 143 United States J Jblack83 20 yr tech
Jblack83 20 yr tech J Joined: Feb 2018 Posts: 143 United States	You ever get this resolved? I am having a similar issue. I n i t shut down. 1014 fault. I got that to go away using IMS fast command "GET". Then "WRT". Now though it is having a RUN MNT shutdown. Won't run up on inspection. Any ideas? [email protected]

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Home Forums General Discussion Technical Questions Tac 32T