|
|
|
1 members (JB01),
21
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,944
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: May 2015
Posts: 359
enthusiast
|
|
enthusiast
Joined: May 2015
Posts: 359 |
Can you use a UIT on a TAC50-04 like a TAC32H? Where you can enter the security code and go into the programming menu? I have a UIT on a TAC50-04 but it only displays speed and direction info. Unable to access programming menu.
Thanks
|
|
|
|
|
Joined: Apr 2017
Posts: 96
journeyman
|
|
journeyman
Joined: Apr 2017
Posts: 96 |
I think that means it isn't the original with that board. Im sure it would need software to operate on a different CPU. I have a job of 4 units when they changed the CPU that UIT no longer works on that controller
Last edited by UpandDown2321; 03/06/20 04:48 PM.
|
|
|
|
|
Joined: May 2017
Posts: 94
journeyman
|
|
journeyman
Joined: May 2017
Posts: 94 |
BART tools, UITs, drive issues etc...you should give in and get a proper updated ims tool and make your life a whole lot easier!
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
He’s right, UIT is a painful way to work on Thyssen equipment. Another possibility If they are still with the correct car and a 16 bit controller is if the CPU was replaced sometimes the UIT won’t work unless you copy the 07c file, rename it 0f8 and load them both. That goes for Tac20 and 16bit Tac50-04.
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
