Originally Posted By: Will
I 2nd a/c ripple being your problem. CLC needs a clean dc signal. Change power supply.


Put meter on AC..Anything over a few millivolts, change it..50 to 100 mv AC is fatal on a 5VDC supply...2 to about 10 is normal. A little more Ripple is allowable on the higer VDC power supplies..

It Don't mean a thing if it aint got that swing.

Cool, Free, Johnny Smith courtesy of NPR..HERE
http://www.npr.org/ramfiles/asc/asc25.smith.asx