Sounding like you've got a good plan here... I'd say Smartrise is always a good option because the boards are the same and interchangeable between the COP, Cartop and controller... If you have any other Smartrise jobs on the books. This makes troubleshooting easy not to mention only having to warehouse one board for many solutions if a repair is needed in the future. Fixtures: i tend to lean toward Innovation... If you choose, they can pre-wire for any controls you pick and will work directly with control manufacturer. Innovation will also make face plate to fit your old boxes, just make sure they'll pass code in your area for proper height if ADA is enforce.
GOOD LUCK!
