|
|
|
0 members (),
23
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,939
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Jun 2017
Posts: 118
member
|
|
member
Joined: Jun 2017
Posts: 118 |
I Have an issue with a 211 I don’t think it’s seeing the door closed limit. Just keeps showing the doors trying to close I tried adjusting the limit and suspected the sensor when I pushed on the plug on the board the u i t showed my doors where closed cut the car loose made about 4 trips then cut out again??? Now I’m suspecting the door board are these still available?
|
|
|
|
|
Joined: Mar 2014
Posts: 144
Liscensed Journeyman
|
|
Liscensed Journeyman
Joined: Mar 2014
Posts: 144 |
Belt/Chain Tension, Sheave bearing, all good?
|
|
|
|
|
Joined: Jun 2017
Posts: 118
member
|
|
member
Joined: Jun 2017
Posts: 118 |
Yes all looks good I think the door card is bad I would get it to run for like half a dozen trips then it would lose dcl I was wiggling the connector on the door board where the limit sensor plug in and it would make back up and doing unplugged everything to check for loose connections now nothing comes up on the UIT. Fuse on the board is good. I got a new board coming so I will try that.
|
|
|
|
|
Joined: Jun 2017
Posts: 118
member
|
|
member
Joined: Jun 2017
Posts: 118 |
Got the new door board today and installed it and the uit isn’t lighting up. I noticed I don’t have a heart beat either? Checked the fuse on the board and controller fuses all good. Any ideas why I’m missing the heart beat or why the uit isn’t working?
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
|
|
|
|
|
Joined: Jan 2014
Posts: 736
old hand
|
|
old hand
Joined: Jan 2014
Posts: 736 |
I had a 211 board that shorted layers in the board after a power failure in the bldg.
|
|
|
|
|
Joined: Jun 2017
Posts: 118
member
|
|
member
Joined: Jun 2017
Posts: 118 |
It’s not on access. I tried the new board which I found out is a rebuilt one from unitec in the running car next to the one that is shut down and had the same results uit never illuminated and heart beat led was on solid. Also tried plugging into the door operator with 2 different Otis tools and could not communicate. I’m thinking it’s a bad board info I have says if there isn’t a heartbeat replace pcb?
|
|
|
|
|
Joined: May 2011
Posts: 338
Mechanic
|
|
Mechanic
Joined: May 2011
Posts: 338 |
I was curious when you said you had a new board coming. I'm pretty sure the door boards for the I motion's are obsolete. I tried to get one last year and ended up having to get a rebuilt one as well.
|
|
|
|
|
Joined: Jun 2017
Posts: 118
member
|
|
member
Joined: Jun 2017
Posts: 118 |
Got another board today put it in and everything worked like it was supposed to. Turns out the first board unitec sent us was a bad board. Thanks guys
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
