Home Forums General Discussion Technical Questions Schindler 330a fault screen

Does anyone have a write up on the fault interpetations on this unit? How does one change the parameters? Presently this one is constantly going on coldoil .Scottsr [email protected]

follow this link will give you some info
www.world-electronics.com/Manuals/300a.pdf

Thanks Kenelev. I did not see fault log for the on board digital display. DO I NEED THE FAST TOOL at this point?

yes,I saw something about elevator from saneielevator.com,and you could ask it for help.it save my time to choose home elevator.

Yes, you need the tools to get in to change parameter and perform learn trip.

I had a similar situation, I unplugged the thermistor connector from the CRIPHNA board and it stopped, got a new thermistor and plugged it back in. No further issues

If you go to error codes, then hit enter, then enter again you will get xtrainfo, give me the fault code and xtrainfo and i can tell you what's going on.

Elevatorfella is kinda right its the thermistat. Disconnect the middle wire and order a new one.