Do you have the new style or the original board. Isn't the brake and motor field two separate boards? Let me know. I have modded a few of these and have boards from running cars.
vatordude- Yes I am looking for the old 3 board set up a mother board with a brake board and a feild board plugged into it. The new boards with the large blue reostats have studs for landing the controll wires directly onto it. But is only good for about half the wires!! So I guess I would need 2 of them and a write up on the cross over from old to new. So far no luck from Kone spares.
Finally got our old boards back from Kone and sent them off to ECI America for repair. Kone after 2 weeks and a dozen e-mails is still trying to identify their own boards!!!!