Schindler 3300 error -000____

0 members (), 25 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums13

Topics7,385

Posts40,944

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

Schindler 3300 error -000____ #30335 12/14/20 01:31 PM
Joined: Jul 2020 Posts: 110 Likes: 1 J Jadam member
Jadam member J Joined: Jul 2020 Posts: 110 Likes: 1	Hi Guy I have a schindler 3300 which showing -000____ in the display, someone who has an idea of what's wrong? I cant get the lift to anythink.. [img]https://ibb.co/hMz2DhL[/img] Last edited by Jadam; 12/14/20 01:34 PM.

Re: Schindler 3300 error -000____ Jadam #30336 12/14/20 02:02 PM
Joined: Aug 2014 Posts: 134 Sweden A Alex75 member
Alex75 member A Joined: Aug 2014 Posts: 134 Sweden	-000_ _ _ _ "-" No direction of the car. "000" Shows the speed of the car. "_ _ _ _" No safety circuit at all, if the safety circuit was good, it would show " * * * * " (IUSK - ISPT - IRTS - ISK) Maybe a fuse has gone? /Alex

Re: Schindler 3300 error -000____ Jadam #30338 12/14/20 02:46 PM
Joined: Jul 2020 Posts: 110 Likes: 1 J Jadam member
Jadam member J Joined: Jul 2020 Posts: 110 Likes: 1	Thanks for the answer Alex All the fuse is good and volts looks fine.. everything that is measured at the safety circuit looks right. I cant entry the menu... ? / Jacob Last edited by Jadam; 12/14/20 02:52 PM.

Re: Schindler 3300 error -000____ Jadam #30339 12/14/20 02:48 PM
Joined: Aug 2014 Posts: 134 Sweden A Alex75 member
Alex75 member A Joined: Aug 2014 Posts: 134 Sweden	Maybe a bad input on the SMIC PCB?

Re: Schindler 3300 error -000____ Jadam #30341 12/14/20 05:00 PM
Joined: Jul 2020 Posts: 110 Likes: 1 J Jadam member
Jadam member J Joined: Jul 2020 Posts: 110 Likes: 1	I will check it thanks agian..

Re: Schindler 3300 error -000____ Jadam #30342 12/15/20 05:27 AM
Joined: May 2019 Posts: 74 Texas H Hope&Poke journeyman
Hope&Poke journeyman H Joined: May 2019 Posts: 74 Texas	I'v seen that with power outages ...building mainline trip.

Re: Schindler 3300 error -000____ Jadam #30348 12/16/20 05:29 PM
Joined: Jul 2020 Posts: 110 Likes: 1 J Jadam member
Jadam member J Joined: Jul 2020 Posts: 110 Likes: 1	After turning off the power 25 times the cpu started up and the elevator is running right now ,i have a suspicion the scpu card is bad. Thx for the help

Re: Schindler 3300 error -000____ Jadam #30359 12/18/20 12:03 PM
Joined: May 2019 Posts: 74 Texas H Hope&Poke journeyman
Hope&Poke journeyman H Joined: May 2019 Posts: 74 Texas	How is it doing now?

Re: Schindler 3300 error -000____ Jadam #30360 12/18/20 04:13 PM
Joined: Jul 2020 Posts: 110 Likes: 1 J Jadam member
Jadam member J Joined: Jul 2020 Posts: 110 Likes: 1	Still running... i ordered a new scpu

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Home Forums General Discussion Technical Questions Schindler 3300 error -000____