I am using cadi 3.1 on a smart mrl 002. When I connect my r232 to usb I get an error message Connection to controller failed. Does anyone know the comm port configuration in the laptop for comm port 1. It is currently set up for IMS. Baud rate 9600 data bits 8 parity none stop bits 1 flow control none. The port works with IMS. It is not with CADI. I may need to change the settings for the comm port. Thanks
#30908 - 04/04/2110:49 PMRe: Connection to controller failed
[Re: wiz]
Joined: Dec 2015 Posts: 1,551Indirtwetrust
ElevatorPractitioner