|
|
|
0 members (),
31
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,944
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Aug 2016
Posts: 778
old hand
|
|
old hand
Joined: Aug 2016
Posts: 778 |
Hi. Got a dmc 1 that had power problems in building. CLC is communicating and giving me 003-002 (selector communication bad)
And 003-001 (front door communication bad) . I think I lost door operator board and selector board. Does anything else generate these codes ? I’m surprised my clc is communicating with those boards in shaftway if they are bad .. usually they need to be disconnected to communicate with CLC . I’ll be back in the morning to trouble shoot some more before ordering boards .. has anyone encountered these codes before ??
|
|
|
|
|
Joined: Aug 2016
Posts: 778
old hand
|
|
old hand
Joined: Aug 2016
Posts: 778 |
Does anyone sell dmc software anymore ??
|
|
|
|
|
Joined: Aug 2016
Posts: 778
old hand
|
|
old hand
Joined: Aug 2016
Posts: 778 |
On a py2 door operator is 675et2 software compatible with ET4 software ?
|
|
|
|
|
Joined: Aug 2016
Posts: 778
old hand
|
|
old hand
Joined: Aug 2016
Posts: 778 |
Also is a py2 interchangeable with a py4 door board
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
PY2 and PY4 boards are interchangeable and it doesn’t matter what software is in them.
|
|
|
|
|
Joined: Aug 2016
Posts: 778
old hand
|
|
old hand
Joined: Aug 2016
Posts: 778 |
Thanks dirt. Is it possible the swing return power supply is only affecting my car top boards ? I originally ruled that out because I was able to communicate with clc from machine room. But I don’t think I have power to p12 on door board. Only led I have is p150 on door board. And selector is dead also. All my machine room fuses were good. But maybe the swing return 3amp fuse is in COP and only dropping out power to car top ?
Last edited by Jluff; 07/03/21 02:37 AM.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
Well, ya… the power supply is dual output. 5v to CLC and 12v to door and selector. 12v output should only be 10.75-11vdc.
The 12v output in the power supply could be bad or one of the 2 boards has a short that’s pulling down the voltage.
Last edited by Indirtwetrust; 07/03/21 02:57 PM.
|
|
|
|
|
Joined: Aug 2016
Posts: 778
old hand
|
|
old hand
Joined: Aug 2016
Posts: 778 |
Are Those test points on the power supply in COP? That’s definitely my problem. Does vertical express sell the power supply ? i have never replaced one
Last edited by Jluff; 07/03/21 05:15 PM.
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
|
|
|
|
|
Joined: May 2011
Posts: 338
Mechanic
|
|
Mechanic
Joined: May 2011
Posts: 338 |
Vertical express and world does: part# 9841507
|
|
|
|
|
Joined: Jun 2017
Posts: 37
newbie
|
|
newbie
Joined: Jun 2017
Posts: 37 |
If you need IMS software that include the Fast tool for DMCI Dover write me to [email protected]We have an special price.
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
