Good morning gentlemen,
I have a duplex Kone Ecospace setup, where we believe the drive is faulting out, but would like to swap between the two controllers to see if the issue follows. I have every menu documentation with the exception of menu 6, where the specific parameters are listed.
I know I can write the values down and re-enter them after the swap, but I want to know what specifically these values are,
6 - 1 = 10
6 -2 = 0.75
Etc...
The documentation I have says to reference document 713983 for my drive (V3F25/18, 40A) but I don't have that document.
If anyone has document 713983 or even the other two options, 784393 (V3F16L) and 713433 (LCEDRV) or all 3 of them so I can have them for future units to help my mechanics out, that would be much appreciated.
