I have a Resolve 20SC mod job and the LCE DRV board has a V3F10 Alarm light on and I can't get the car to run. It would attempt to run (all the needed inputs and outputs on the LCE CPU) but then shut off and each attempt the car would drift up almost an inch. Now the car is in the overhead and going to put weights in to get it back down. There is very little information on the Yaskawa drive and I've heard that the software and diagnostics in that drive is proprietary to Kone (Magnetek told us when we called and said they couldn't help us). Is that alarm light driven from the Yaskawa drive or is it from the DRV board? I was checking menu 6 and comparing to one of the other cars in the group but all parameters matched. I did notice that the menu 6 version number in the controller was 4013 and the commissioning report left on the job for was 4009 so I'm guessing there's little to no difference between the 2 but don't know for sure. Any help or insight would be greatly appreciated.
