hi,
So the thermo is recognized, that's good
.
In the 6_75 menu you can only activate the RealTimeData view individually, but not see it.
NOTE: RT display is moved behind Select key. From Floor
display; 1st Select key press enters Real Time Display, 2nd
Select key activates Car Speed Display. Displays selected
drive variable.
i have a few more ideas.
parameter lock (6_95) (0=open, 1=locked)
Set Standby mode (6_12) parameter to 0 (deactivates drive standby mode)
6_99 to 1 (save para) switch power off/wait/power on
Check if the error occurs again.
yes:
Check standby settings of cabin light, fan door drive. Deactivate individually for test purposes.
No:
Check all connectors (screw terminals), connections and shielding, PE !!!(electromagnetic interference) on KDL16 and motor.
Disconnect NTC and connect a resistor with 1.8kohm or higher.
Translated with
www.DeepL.com/Translator (free version)
