|
|
|
0 members (),
36
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,939
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: May 2012
Posts: 89
journeyman
|
|
journeyman
Joined: May 2012
Posts: 89 |
Is there a tool for unlocking menus of KCE konrolller as LCE. I heard that KONE uses own mobile app. for this. Thanks.
|
|
|
|
|
Joined: Jul 2020
Posts: 110 Likes: 1
member
|
|
member
Joined: Jul 2020
Posts: 110 Likes: 1 |
The KCE control is not locked, you can use the push buttons a bit as on the LCE control.
If you need to change in parameter or something else you need a program.
|
|
|
|
|
Joined: Aug 2014
Posts: 134
member
|
|
member
Joined: Aug 2014
Posts: 134 |
Well, is that not the same as being locked?
Unless you have the app, mini console or KCE maintenance tool, you cant really do much on these controllers....
|
|
|
|
|
Joined: Aug 2017
Posts: 579 Likes: 6
addict
|
|
addict
Joined: Aug 2017
Posts: 579 Likes: 6 |
I've worked on these a good bit. Fought through a bunch of issues like loosing parameters when the Dallas chip went out etc. It's always in the back of my mind when im working on it, how much easier would this be if I had the two tools that plugged in.... to me it's like working on a VE icon or tac 32, yes they have UITs but I'm going and putting the laptop on it. I can work on it alot faster and do more easier.
|
|
|
|
|
Joined: Jul 2018
Posts: 27
newbie
|
|
newbie
Joined: Jul 2018
Posts: 27 |
You can use hyper terminal to communicate with these controllers. The user interface can be locked out from accessing menus but it can be unlocked with HT.
|
|
|
|
|
Joined: Apr 2014
Posts: 280
Engineer
|
|
Engineer
Joined: Apr 2014
Posts: 280 |
Can you pm me how?
Last edited by heisenberg; 02/20/22 03:16 PM.
|
|
|
|
|
Joined: Aug 2014
Posts: 134
member
|
|
member
Joined: Aug 2014
Posts: 134 |
@Stall Protection
You have noted that we discuss the new "KCE" controller, not the "KCM-831" controller?
If you have any info about the "KCE" and Hyper Terminal I would like to see it!
/Alex
|
|
|
|
|
Joined: Dec 2021
Posts: 5
stranger
|
|
stranger
Joined: Dec 2021
Posts: 5 |
how is it possible? would you help me out!
Troubleshoot to KONE elevator is fun.
|
|
|
|
|
Joined: Mar 2014
Posts: 22
stranger
|
|
stranger
Joined: Mar 2014
Posts: 22 |
Scusami tu riesci ad entrare su Kce con hiper terminal ? Mi dai maggiori informazioni grazie
|
|
|
|
|
Joined: Oct 2022
Posts: 7
stranger
|
|
stranger
Joined: Oct 2022
Posts: 7 |
Im looking for tool to Kone KCE as well. Hyperterminel sounds interresting. How do I do that and what cabel do I need?
Best Regards Tom
Troubleshooter
|
|
|
|
|
Joined: Jul 2020
Posts: 110 Likes: 1
member
|
|
member
Joined: Jul 2020
Posts: 110 Likes: 1 |
You cannot use hyper terminal, you must use their mobile app or PC. But you can read fault codes, change many parameters and troubleshoot without it.
|
|
|
|
|
Joined: Oct 2022
Posts: 7
stranger
|
|
stranger
Joined: Oct 2022
Posts: 7 |
Yes. I have changed many parameters and made shaftlearn, reset and other stuff on them. But there are many adresses in the parameterlist you can't reatch and make change to. So I'm looking for a tool, to give me full access to the system. :-)
Best Regards Tom
Troubleshooter
|
|
|
|
|
Joined: Jul 2021
Posts: 1
stranger
|
|
stranger
Joined: Jul 2021
Posts: 1 |
I would like to know to how can I open the ice board
|
|
|
|
|
Joined: Oct 2019
Posts: 18
stranger
|
|
stranger
Joined: Oct 2019
Posts: 18 |
How to connect kce and hyper terminal please?
|
|
|
|
|
Joined: Apr 2023
Posts: 11
stranger
|
|
stranger
Joined: Apr 2023
Posts: 11 |
I don't think it's possible through hyperterminal, since the program doesn't incorporate the diagnostic loop by serial as the lce did, now it expects a handshake from the dongle that is connected to it. If I'm wrong that would be a breakthrough! Thank you 
|
|
|
|
|
Joined: Oct 2019
Posts: 18
stranger
|
|
stranger
Joined: Oct 2019
Posts: 18 |
And connect LCE with hyper terminal...yes?
|
|
|
|
|
Joined: Apr 2023
Posts: 11
stranger
|
|
stranger
Joined: Apr 2023
Posts: 11 |
Yes, for LCE you only have to connect with an RS232/USB adapter through a standard null modem cable, you can do it with putty or with the windows hyperterminal, send the special character Ctrl+e Ctrl+c and it's like a standard bash program, it has its functionalities, etc.
|
|
|
|
|
Joined: Oct 2019
Posts: 18
stranger
|
|
stranger
Joined: Oct 2019
Posts: 18 |
Thanks..possible reset counter knx?
|
|
|
|
|
Joined: Apr 2023
Posts: 11
stranger
|
|
stranger
Joined: Apr 2023
Posts: 11 |
If you know the algorithm used by the LCEUIO you can send it but there is no specific operation from hyperterminal for it, you can see the Neuron ID parameter...
Last edited by wikilift; 04/21/23 07:30 AM.
|
|
|
|
|
Joined: Oct 2019
Posts: 18
stranger
|
|
stranger
Joined: Oct 2019
Posts: 18 |
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
