I have recently been working on troubleshooting a Dover DMC-I and using the FREEDOMWare software. I’ve been having door issues, with HD-85 operators, on a job and have been successfully able to make parameter changes to both operators. The issue I’m running into is that the faults I’m getting are leading me to believe I have to complete a door learn on each operator to achieve an updated pulse count. When attempting to click what I believe will let me start my door learn procedure, I am prompted with a warning that shaft will need to be learned. Ide like to avoid making any changes or learn procedures besides that for my doors. I know this is possible with a FAST tool, but I’m not sure about with the World Electronics software. If anyone has any experience doing this, or any information that would help, i would really appreciate it. Currently I have no access to a FAST tool.