Who's Online Now
0 members (), 23 guests, and 3 robots.
Key: Admin, Global Mod, Mod
September
S M T W T F S
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30
Newest Members
Josephs, Javy89, Ropeguy67245, kywewa, Ingvar
10,040 Registered Users
Forum Statistics
Forums13
Topics7,385
Posts40,944
Members10,040
Most Online3,137
Apr 9th, 2026
Previous Thread
Next Thread
Print Thread
Joined: May 2023
Posts: 9
S
stranger
stranger
S Offline
Joined: May 2023
Posts: 9
Hello, I have 2 TRX5's that are having similar faults. I know what the faults are but I don't know why it's getting them.1 car is getting these:
14 - underspeed
103 - HS stop
8- sb fault

I replaced the sb relays, the aux's on the sh relay, checked my door locks and gate switch. The underspeed will happen anywhere in the shaft way and it can happen if the cars been running nonstop all day or on its first run. It will level off at a floor and then resume it's running. I checked the encoder belts on the gov and the tach on the machine. Physically everything looks good. But I haven't replaced them.

My other car is getting a 413 fault on the dsd 412 drive intermittently and also underspeed once in a while.

Also, the brakes aren't dragging

Joined: Oct 2011
Posts: 29
R
Sniper
Sniper
R Offline
Joined: Oct 2011
Posts: 29
list the faults in the order they are and also get the extra info
go error log , select error and enter to get more info
hex value at the bottom of screen

rope slip on sheave
what motor it got pms420 warner brakes
Attachments
error 8a.png (506.44 KB, 19 downloads)
error 8.png (513.67 KB, 9 downloads)
error 103.png (179.17 KB, 11 downloads)
error 14.png (498.12 KB, 12 downloads)

Last edited by ryansnipes; 05/08/23 07:45 AM.
Joined: Oct 2011
Posts: 29
R
Sniper
Sniper
R Offline
Joined: Oct 2011
Posts: 29
nore info
Attachments
error 413.png (342.25 KB, 9 downloads)
error 412.png (281.22 KB, 1 downloads)

Joined: May 2023
Posts: 9
S
stranger
stranger
S Offline
Joined: May 2023
Posts: 9
There is no extra information. I know what the faults are but I don't know why the underspeed is happening. I'll check the hoist ropes

14 8:26:07
103. 8:26:09

14. 11:14:02
103. 11:14:05

8. 12:49:50

14. 13:21:09
103. 13:21:11


Last edited by SmackTheRelay; 05/08/23 03:51 PM.
Joined: May 2023
Posts: 9
S
stranger
stranger
S Offline
Joined: May 2023
Posts: 9
It has an old Westinghouse 208


So yesterday while running it I was getting sn, sh,underspeed and high priority faults. The sh aux's are new, the sb1 sb2 relays are new. I didn't notice and hoist or gov rope slippage.

https://imgur.com/a/VZPRmXZ

Imgur might compress it if you don't have the app. I dunno how else to post that

Here are the faults.



Last edited by SmackTheRelay; 05/09/23 12:03 PM.
Joined: Oct 2011
Posts: 29
R
Sniper
Sniper
R Offline
Joined: Oct 2011
Posts: 29
check shoe lines both car and counterwheight
tacho on governor and car
Maybe gov rope need more tension
Tight spot on the guides

Last edited by ryansnipes; 05/09/23 06:55 PM.

Link Copied to Clipboard
Photo Gallery
service tool laptop
service tool laptop
by dunkdadrunk, February 4
rip orona
rip orona
by epic_ecodisc, January 7
what controller is this?!
what controller is this?!
by Alex_ELMAN, December 4
HW PM
HW PM
by Chris, January 13
PECCO PH5000 Overspeed Governor
PECCO PH5000 Overspeed Governor
by stankap, September 24
Drive sheave
Drive sheave
by jkh, October 10
The best helper.
The best helper.
by Adrian, August 8
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Release build 20240826)
Responsive Width:

PHP: 8.3.33 Page Time: 0.028s Queries: 28 (0.009s) Memory: 3.0234 MB (Peak: 3.5927 MB) Data Comp: Off Server Time: 2026-09-21 18:15:23 UTC
Valid HTML 5 and Valid CSS